tags: - openwrt - MT7620N - GL MT300N V1 categories: - informational comments: true
Install openwrt on GL MT300N V1 router Chipset MT7620N (Media Tech)
Supported Versions Brand Model Version Current Release OEM Info Forum Topic Technical Data GL.iNet GL-MT300N v1 21.02.3 http://www.gl-inet.com/mt300n/ View/Edit data
Connect router via cross ethernet cable to computer
Login via web
LuCI Web Upgrade Process Browse to http://192.168.8.1/cgi-bin/luci/admin/system/flashops
Download following
wget https://downloads.openwrt.org/releases/21.02.3/targets/ramips/mt7620/openwrt-21.02.3-ramips-mt7620-glinet_gl-mt300n-squashfs-sysupgrade.binUpload image file for sysupgrade to LuCI Wait for reboot
Via CLI
sysupgrade Login as root via SSH on 192.168.8.1, then enter the following commands: cd /tmp wget https://downloads.openwrt.org/snapshots/trunk/ramips/mt7620/openwrt-ramips-mt7620-gl-mt300n-squashfs-sysupgrade.bin sysupgrade /tmp/openwrt-ramips-mt7620-gl-mt300n-squashfs-sysupgrade.bin
mtd If sysupgrade does not support this router, use mtd.
Login as root via SSH on 192.168.8.1, then enter the following commands: cd /tmp wget https://downloads.openwrt.org/snapshots/trunk/ramips/mt7620/openwrt-ramips-mt7620-gl-mt300n-squashfs-sysupgrade.bin mtd write /tmp/openwrt-ramips-mt7620-gl-mt300n-squashfs-sysupgrade.bin linux && reboot
Debricking generic.debrick https://openwrt.org/docs/guide-user/troubleshooting/generic.debrick failsafe factory reset https://openwrt.org/docs/guide-user/troubleshooting/failsafe_and_factory_reset
The U-Boot bootloader has a web interface to update the firmware. To use the web interface, you need to connect to the LAN port, and your computer’s ethernet port set to 192.168.1.2⁄24. To start the web interface:
With the router unplugged, press and hold the reset button. Plug in the router. Hold the reset button for at least 3 seconds. Release button, wait a few seconds, and connect to http://192.168.1.1
Specific Configuration Network interfaces The default OEM network configuration is:
Interface Name Description Default configuration br-lan LAN & WiFi 192.168.8.1⁄24 vlan1 (eth0.1) LAN port None vlan2 (eth0.2) WAN port DHCP wlan0 WiFi Disabled
Upgrading to latest openwrt
https://openwrt.org/docs/guide-user/network/dsa/upgrading-to-2102 712 GL.iNet GL-MT300N v1 16 64 ramips mt7620 gl-mt300n_v1